Kyocera TASKalfa 1800 Service Manual page 338

9. Remove the electric wire cover by
releasing the lock lever.
10. Remove the developer electric wire
connector.
11. Remove the screw and then pull the
developer evacuation lever forward.
12. Remove the developer unit from main
unit by pulling forward.
Developer
electric wire connector
Hook
Electric wire cover
Developer
evacuation lever
Developer unit
1-5-60
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Lock lever
Figure 1-5-102
Figure 1-5-103