Scan Margin Dp - Kyocera TASKalfa 1800 Service Manual

U404

Scan margin DP

Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
A Margin
B Margin
C Margin
D Margin
6. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Caution
If the above adjustment does not optimize the margins, perform the following maintenance modes.
U034 -------- U402 -------- U403 -------- U404
(P.1-3-24)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
DP left margin
DP leading edge margin
DP right margin
DP trailing edge margin
DP left margin
(2.5 +1.5/-2.0 mm)
(P.1-3-72) (P.1-3-73)
Setting
range
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
0.0 to 10.0
DP leading edge margin
(3.0 ±2.5 mm)
DP right margin
(2.5 +1.5/-2.0 mm)
DP trailing edge margin
(3.0 ±2.5 mm)
Figure 1-3-16
1-3-74
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Initial Change in
setting value per step
3.0
2.5
3.0
4.0
0.1
0.1
0.1
0.1