U199
Fuser Temp
Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the start key. The fuser temperature is displayed.
Display
Fix Center
Fix Edge
* : Temperature a acquired and re-displayed periodically.
Completion
Press the stop key. The screen for selecting a maintenance mode No. is displayed.
U203
Chk DP Ope
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP.
3. Select the mode to be operated.
Display
Mono
Color
4. Select the item to be operated.
Display
ADP
RADP
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Temperature in the center of the fixing. (°C)
Temperature in the edge of the fixing. (°C)
Mono reading
Color reading
With paper, single-sided original.
With paper, double-sided original.
1-3-57
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Description
Description
Description