Unevenly Repeating Horizontal Streaks In The Printed Objects. Spots In The Printed Objects (Image Rendering Problem) - Kyocera TASKalfa 1800 Service Manual

(15) Unevenly repeating horizontal streaks in the printed objects. Spots in the printed
objects.
Print example
Defective part
Developer unit
1
Paper
2
1. Installation at a high altitude.
2. Using the paper with high surface resistance.
Check description
The device is installed in an
altitude higher than 1500 m sea
level.
Check if paper is of high surface
resistance.
Cause of trouble
If the device is installed in an altitude greater
than 1500 m sea level, perform the following.
Change the paper to another.
1-4-83
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Corrective Action