Adj Dp Loop Amt; Toner Area Code - Kyocera TASKalfa 1800 Service Manual

U942

Adj DP Loop Amt

Description
Adjusts the deflection generated when the document processor is used.
Purpose
Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the
document processor is used.
Setting
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
6. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display
Front
Back
* : The greater the value, the larger the deflection; the smaller the value, the smaller the
deflection.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of
original occurs, decrease the value.
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U969

Toner Area Code

Description
Displays the toner area code.
Purpose
To check the toner area code.
Method
1. Press the start key. The toner area code is displayed.
Display
Code
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Deflection of single-sided original
Deflection of double-sided original
Toner area code.
Setting
range
-30 to 30
-60 to 60
Description
1-3-117
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Initial Change in
setting value per step
0
0
1
1