Fuser Eject Sensor Retention (Casette 3 Feeding); Fuser Eject Sensor Retention; Fuser Eject Sensor Retention (Duplex Feeding); Fuser Eject Sensor Retention (Mpf Feeding) - Kyocera TASKalfa 1800 Service Manual

Code

Fuser eject sensor retention

4211
(Casette 1 feeding)
Fuser eject sensor retention
4212
(Casette 2 feeding)
Fuser eject sensor retention
4213
(Casette 3 feeding)
Fuser eject sensor retention
4214
(Casette 4 feeding)
Fuser eject sensor retention
4218
(Duplex feeding)
Fuser eject sensor retention
4219
(MPF feeding)
DP original feed sensor ON
9000
undetected
DP narrowing
9001
DP initial Jam
9002
DP registration sensor OFF
9004
undetected
DP unit open
9010
DP cover open
9011
DP original feed sensor OFF
9110
undetected
DP registration sensor ON
9200
undetected
DP timing sensor ON unde-
9400
tected
DP timing sensor OFF unde-
9410
tected
*: Refer to figure 1-4-1 for paper misfeed indication (see page 1-4-1).
Contents
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 1.
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 2 (paper feeder).
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 3 (paper feeder).
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from cassette 4 (paper feeder).
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from duplex section.
Fuser eject sensor (FUES) does not turn off dur-
ing paper feed from MP tray.
DP feed sensor (DPOFS) does not turn on within
specified time during the first sheet feeding (Retry
5 times).
DP timing sensor (DPTS) turns off within the
specified time since the sensor turns on.
Sensor in the conveying system is on since origi-
nal feeding starts.
DP registration sensor (DPRS) is not turned on
within specified time since original switchback
operation starts.
Document processor is opened during original
feeding.
The DP top cover is opened during original feed-
ing.
DP original feed sensor (DPOFS) does not turn
off within specified time of DP timing sensor
(DPTS) turning on.
DP registration sensor (DPRS) does not turn on
within specified time of DP original feed sensor
(DPOFS) turning on.
DP timing sensor (DPTS) does not turn on within
specified time of DP original feed sensor
(DPOFS) turning on.
DP timing sensor (DPTS) does not turn off within
specified time of DP original feed sensor
(DPOFS) turning off.
Conditions
1-4-5
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Jam
location*
D
D
D
D
D
D
F
F
F
F
F
F
F
F
F
F