Taskalfa - Kyocera TASKalfa 1800 Service Manual

Revision Date
2 11 November 2013 1-3-15
Pages
Change: Item numbers
1-3-24, 1-3-25 Change: Data digit number of [LSU Out Top] and [LSU
Out Left]
1-3-25 to 40 Correct: added the statement of a numerical change key
1-3-42
1-3-44 to 46
1-3-51 to 53
1-3-55, 1-3-63
1-3-67, 1-3-68
1-3-70
1-3-72 to 1-3-74
1-3-78 to 80
1-3-116
1-3-117, 2-3-7
1-3-37 Correction: Description of "Back Head"
1-3-42, 1-3-43 Change: Items and Initial setting of Display
1-3-44 Added: The cautions sentence about High Altitude
Correction: The contents of Display and Description
1-3-51 Correction: Procedure 2 to 4 in U140
1-3-53 Correction: Setting range value in U156
1-3-54 Correction: delete the clearing function of U158
1-3-55 Correction: Setting range value in U161
1-3-57 Clerical error correction: The display of U199 is cor-
rected.
1-3-68 Correction: Setting range value in U332
1-3-69 Added: Procedure of setting to On/Off in U341
1-3-72 to 74 Correction: Setting range value in U402 ,U403 and U404
1-3-75 Deleted: Procedure 4 "Select [Target] and ..."
1-3-112 Deleted: How to display the history of paper jams
1-3-113
1-3-116 Deleted: U928 Life Cnt
1-4-3 Clerical error correction: Code 0120, 0121
1-4-94 to 109 Added: 1-4-9 Send error code
1-5-19 Clerical error correction: Change the procedure 9 and
delete the procedure 10 and Figure 1-5-30
1-5-50 Added: Detaching and refitting the exit unit
2-2-2 Added: Master file name for Advanced model
Correction: Performance number in procedure 10
2-2-8 to 10 Added: YC2003, YC2007
2-3-10
2-3-8 Change: Signal name of YC8
2-3-10 Change: Signal name of YC1, YC2010, YC2011 and CIS
2-3-11 Change: Signal name of YC2, YC3 and YC4
Revised contents
1-4-10 Error codes