Kyocera TASKalfa 1800 Service Manual page 347

42. Remove four connectors from the
clutches and the motor.
43. Remove the wire guide by releasing
two projection parts of the wire guide
and lifting it upwards.
44. Remove the screw.
45. Remove the clutch cover by unhooking
three hooks.
46. Pull two clutches out.
*: It is not dropping a clutch, when removing
a cover.
Connector
Wire guide
Projection
parts
Figure 1-5-120
Clutch
Clutch cover
Figure 1-5-121
1-5-69
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Clutch
Connectors
Clutch
Clutch
Hook
Hook
Motor
Hook
Screw