Kyocera TASKalfa 1800 Service Manual page 53

15. Pass the heater wire through the aper-
ture of the frame.
16. Set the heater to the cut-and-raised
portion parts.
17. Bent two cut-and-raise portions and fix
the heater.
18. Pass the heater wire through two
aperture parts.
19. Connect the connector of the heater
wire to the connector on main unit.
20. Pass the heater wire through the wire
saddle and fix.
21. Refit all the removed parts.
Cut-and-raised portions
Heater
Heater wire
Aperture
Figure 1-2-32
Wire saddle
Heater wire
Connector
Connector
on main unit
Figure 1-2-33
1-2-23
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Heater
Heater wire
Apertures