Clr Trans Cnt; Set Toner Install - Kyocera TASKalfa 1800 Service Manual

U127

Clr Trans Cnt

Description
Displays and clears the counts of the transfer counter.
Purpose
To check the count after replacement of the transfer roller. Also to clear the counts after replacing
transfer roller.
Method
1. Press the start key. The current counts of the transfer counter is displayed.
Display
Cnt
Clear
Clearing
1. Select [Clear].
2. Press the start key. The counter value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U130

Set Toner Install

Description
To set the toner installation mode.
Purpose
Toner installation is performed at the time of a machine setup.
1. Press the start key.
2. Select [Excute].
3. Press the start key. The operation starts.
Display
Excute
* : A toner motor cannot be operated while an engine drives.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Transfer counter.
Value is cleared.
Execute toner install.
1-3-49
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Description
Description