Set Calls; Setting: Exchange/Dial Tone - Kyocera TASKalfa 1800 Service Manual

U660

Set Calls

Description
Makes setting regarding the network control unit (NCU).
Purpose
To be executed as required.
Method
1. Press the start key.
* : Select the item to be set.
Display
Exchange
Dial Tone
Busy Tone
PBX Setting
DC Loop
Setting: Exchange
Selects if a fax is to be connected to either a PBX or public switched telephone network.
1. Select the setting.
Display
PSTN
PBX
* : Initial setting: PSTN
2. Press the start key. The setting is set.
Setting: Dial Tone
Selects if the dial tone is detected to check the telephone is off the hook when a fax is connected
to a public switched telephone network.
1. Select the setting.
Display
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Sets the connection to PBX/PSTN.
Sets PSTN dial tone detection.
Sets busy tone detection.
Setting for a PBX.
Sets the loop current detection before dialing.
Connected to the public switched telephone network.
Connected to a PBX.
Detects the dial tone.
Does not detect the dial tone.
1-3-105
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Description
Description
Description