Table Center - Kyocera TASKalfa 1800 Service Manual

U067

Table center

Description
Adjusts the scanner center line of the original scanning.
Purpose
Make the adjustment if there is a regular error between the center lines of the copy image and
original.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
Front
6. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
For copy example 1, decrease the value. For copy example 2, increase the value.
Increasing the value moves the image leftward and decreasing it moves the image rightward.
7. Press the start key. The value is set.
Caution
If the above adjustment does not optimize the center line, proceed with the following maintenance
modes.
U034 --------- U065 --------- U067
(P.1-3-24)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Scanner center line
Center line of the copy image (within ± 2.0 mm)
Original
(P.1-3-31)
Setting
range
-40 to 40
Copy Copy
example 1 example 2
Figure 1-3-8
1-3-34
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Initial Change in
setting value per step
0 1