Set Toner Apply - Kyocera TASKalfa 1800 Service Manual

U147

Set Toner Apply

Description
A mode setup of the operation which removes the toner in the development unit which carried out
the charge rise is performed.
Purpose
The basic target does not need to change a setup.
However, the mode is changed when outputting a manuscript with an always low printing rate in
large quantities.
* : If the toner which carried out the charge rise stagnates in a development unit, concentra-
tion will fall.
Method
1. Press the start key.
* : Select the [Threshold].
Display
Threshold
Setting
1. Select the item to be set.
2. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display
Coverage Rate
Page Cnt1
Page Cnt2
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Changes the threshold of each setting.
Threshold of print coverage rate.
Threshold of page count. Part1. (Used for judgement in last page of print
job)
Threshold of page count. Part2. (Used for judgement in page of continu-
ous printing)
1-3-52
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Description
Description