Fsdelete Command - Xerox DP N24 System Administrator Manual

FSDELETE Command

Syntax @PJL FSDELETE NAME = "pathname" [<CR>] <LF>
Parameters Parameter
NAME="pathname"
NAME =
command (see page 5-4).
The FSDELETE command is used to delete files from the DP N40
file system.
Functional Range
ASCII 01 thru 255
"pathname"
— where "pathname" has the same parameters as the FSDOWNLOAD
Chapter 5: Using the Hard Disk Drive / Downloading Fonts and Jobs
Downloading Fonts and Macros
Default
N/A
5-7