Using Trays 1, 2, And 3 (If Installed) - Xerox DocuPrint N24 User Manual

Using Trays 1, 2, and
3 (if installed)
1
Pull out the tray (Tray 1 is shown above)
until it stops.
3
Gently lift up the width guide and slide it
all the way until it stops.
If you are replacing paper of the same
size, skip to Step 5 on page 4-8.
Trays 1 and 2 in the printer, and Tray 3 in the optional
2,500 Sheet Feeder, hold up to 500 sheets of 20 lb.
2
(80 g/m ) paper each. Refer to the section "Selecting
Paper" (page 4-2) for acceptable paper sizes and weights.
2
Prepare a stack of paper, making sure the
tops of the sheets are aligned.
4
Press down the gray handle and slide the
side guide all the way until it stops.
Chapter 4: Paper Loading and Orientation
Loading Paper
4-7