Xerox DP N24 System Administrator Manual page 94

PCL Menu
Table 3.8 PCL Menu functions (continued)
Menu Item and Function
Symbol Set
Set the default font symbol set used in
PCL. The available values are:
Desktop PC-8*
ISO L1 PC-8 DN
ISO L2 PC-8 Tk
ISO L5 PC-850
ISO-4 PC-852
ISO-6 PC Cyrillic
ISO-11 Pi Font
ISO-15 PS Math
ISO-17 PS Text
ISO-21 Roman-8
ISO-60 Vn Int'l.
ISO-69 Vn Math
ISO-Latin Cyr Vn US
Legal Win 3.0
Math-8 Win L1
Ms Publ. Win L2
Win L5
The symbol set is a collection of
characters available for a font, including
uppercase and lowercase alphabets,
punctuation marks, and special characters
such as open and close quotation marks or
international characters.
Line Terminat.
Cause a Carriage Return to be added after
every Line Feed appearing in the PCL
text. The available values are:
Off*
On
This setting enables the
<LF>=<CR><LF> line termination mode
in PCL as the default.
3-30 DP N24, N32 and N40 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . You will see:
5. Press On Line . You will see:
Display
M e n u s
P C L M e n u
P C L M e n u
S y m b o l S e t
S y m b o l S e t
New Value
P C L M e n u
S y m b o l S e t
R e a d y
M e n u s
P C L M e n u
P C L M e n u
L i n e T e r m i n a t .
L i n e T e r m i n a t . =
New Value
P C L M e n u
L i n e T e r m i n a t .
R e a d y
Table 3.8 Page 4 of 4
=