9
Replace the controller board and tighten the
thumbscrews by hand.
10
Reattach the GFI power cord to the printer.
Reattach any cables to printer ports.
Power ON the printer.
11
Print a Configuration Sheet. (page 3-83) and
12
confirm that the proper Network Interface
appears on the sheet.
If the proper NIC does not appear on the
Configuration Sheet or if an error
message appears, perform steps 1 through
5 of the next section "Removing the NIC".
Then reinstall the NIC and print another
Configuration Sheet. If the proper NIC
still does not appear on the sheet or the
error message is still present, contact the
dealer from which you bought your
printer, or contact Olivetti.
Appendix C: Installing and Removing Printer Options
Network Interface Card (NIC)
C-53