Table of Contents
Advertisement
Installing the Printer
1-16
DP N24, N32 and N40 System Administrator Guide
To avoid electric shock or fire hazard:
•
Do not connect the printer to any power source until you are
instructed to do so.
•
Do not plug the printer into an AC outlet with incorrect voltage.
•
The printer must be properly grounded. Do not bypass the
ground plug. Use a three-prong connection.
•
Do not use a multi-extension cord connector.
•
If using an extension cord, do not use one with rated current less
than 125V 15A (250V 13A in Europe). Do not damage or modify
the extension cord. Do not bend, pull or place heavy objects on
the extension cord.
•
Never touch the GFI (Ground Fault Interrupt) or plug with wet
hands.
•
If you do not use the GFI, Olivetti does not guarantee the
successful operation of your machine.
To avoid printer malfunction or damage:
•
Position the printer on a horizontal, sturdy and stable surface.
•
Operate the printer under temperature conditions of 10 to 35° C
(50 to 95° F), with humidity 15 to 85%. Be sure to keep the
temperature below 28º C (82° F) if the humidity is 85%.
If the temperature changes significantly, condensation may
develop inside the printer and cause printing problems.
Therefore, be sure to let the printer stabilize for some time to
adjust to the new temperature.
•
Do not subject the printer to direct sunlight.
Advertisement
Chapters
Table of Contents
