Xerox DP N24 System Administrator Manual page 155

Table 3.17 Reset Menu functions
Menu Item and Function
Init Disk
Initialize the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
Disk Format
Format the Hard Disk Drive. The
available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line . You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . During
formatting, you will see:
5. When the formatting is complete,
you will see:
Chapter 3: Using the Control Panel
Reset Menu
Display
M e n u s
R e s e t M e n u
R e s e t M e n u
I n i t D i s k
I n i t D i s k
Y e s
R e s e t M e n u
I n i t D i s k
R e a d y
M e n u s
R e s e t M e n u
R e s e t M e n u
D i s k F o r m a t
D i s k F o r m a t
Y e s
D i s k F o r m a t
P l e a s e W a i t . . .
R e a d y
Table 3.17 Page 4 of 4
=
=
3-91