Xerox DP N24 System Administrator Manual page 32

Installing the Printer
1-24 DP N24, N32 and N40 System Administrator Guide
27 A Paper Size Label card can be found in each
tray. Insert the correct paper size label into the
paper size slot on the front of the tray, then
push the tray all the way back into the printer
until it latches.
For complete paper size and loading
information, refer to Chapter 2: Paper
Handling.
28 Repeat the paper loading steps for the other
paper tray(s).
29 If you have other options to install, refer to
Appendix C: Installing and Removing Printer
Options for instructions. Otherwise, you can
proceed to the next step and complete the
installation.
30 Attach the interface cable from your host
computer or network.
31 For 110 V installation, go to Step 32.
For 220 V installation, go to Step 33.