Xerox DP N24 System Administrator Manual page 197

Table 6.2 Control Panel messages and corrective actions (continued)
Message
W a i t i n g . . .
W a r m i n g U p . . .
Description/Corrective Action
The printer was busy processing data from a host but the print job was not completed.
This message appears until:
• Another print job is received.
• The Port Timeout expires.
• The last page timeout expires.
• The PostScript "waittimeout" expires.
ACTION: None.
The Fuser has not warmed up yet.
This message disappears when the printer is ready. The message displays at power
ON and may display after the cover has been opened for some time or when the
printer is exiting Power Saver mode.
ACTION: None.
Control Panel Messages
Table 6.2 Page 19 of 19
Chapter 6: Troubleshooting 6-23