Xerox DP N24 System Administrator Manual page 121

Table 3.13 Ethernet Menu functions (continued)
Menu Item and Function
IP Address
Set the four byte IP address. The available
values are:
xxx.xxx.xxx.xxx
.
Where xxx = 000 to 255
This item only appears if IP Address Res.
is set to Control Panel
For this item (after Step 3), Item Up
moves the cursor to the right through the
displayed IP address and Item Down
moves the cursor to the left. This allows
you to change characters within the string
rather than having to reenter the entire
string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Value
Down decrements the value.
Keystrokes
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
. You will see:
.
4. Press Value Up
Down
the character above the cursor. The
value is incremented or
decremented by 1 each time the
key is pressed. Holding down
Value Up
causes continuous scrolling
through the values.
5. To change other characters in the
IP address, press Item Up
Item Down
left respectively through the
character string, then press Value
Up or Value Down
change the value of the character
above the cursor (as in Step 4).
6. When you have completed setting
the IP address, press Enter
You will see:
7. Press On Line
or Menu
M e n u s
until you see:
E t h e r n e t M e n u
or Item
E t h e r n e t M e n u
until you see:
I P A d d r e s s
or Value
I P A d d r e s s
xxx.xxx.xxx.xxx
or Value
I P A d d r e s s
to change the value of
xxx.xxx.xxx.xxx
or Value Down
I P A d d r e s s
or
xxx.xxx.xxx.xxx
to scroll right or
to
E t h e r n e t M e n u
.
I P A d d r e s s
. You will see:
R e a d y
Chapter 3: Using the Control Panel
Ethernet Menu
Display
=
=
=
Table 3.13 Page 8 of 11
3-57