Xerox DP N24 System Administrator Manual page 243

3 Pull down the cover to expose the upper two
feedrolls.
Installing the Maintenance Kit
4 Replace the upper two feedrolls. (Refer to
Figure B.1 on page B-17 if necessary.)
For a tabletop configuration printer, complete
the procedure by repeating Steps 2 to 4 for
Tray 2. Replace and close Trays 1 and 2 when
done.
For a console configuration printer, repeat
Steps 2 to 4 for Trays 2 and 3, then continue
with Step 5 on page B-20.
Appendix B: Maintaining the Printer B-19