Xerox DP N24 System Administrator Manual page 28

Installing the Printer
11 Hold the amber handle with one hand and
gently push the Toner Cartridge all the way
into the printer.
The printer's front cover is spring loaded
and will not stay open. You must hold it
open or else it will shut.
Do not touch any parts inside the
printer. Make sure the cartridge is
firmly seated in the printer.
1-20 DP N24, N32 and N40 System Administrator Guide
12 Gently pull the sealing tape straight out in the
direction of the arrow.
If the tape is pulled out at an angle, it
may break.
13 Close Door A and the front cover.
When closing Door A, do not use the
latch on the cover. Instead, follow the
instruction label on the cover for the
correct location to push the cover
closed.
If you are installing the optional Duplex
14
Module, skip to Step on page 1-22, complete
the remaining steps, then refer to Appendix
C: Installing and Removing Printer Options for
instructions on installing the Duplex Module
(and other options).