Removing
The printer should always have either the 50 Sheet Bypass Feeder
or the Envelope Feeder installed. Otherwise, internal moving parts
of the printer will be exposed.
Appendix C: Installing and Removing Printer Options
3
Hold the Envelope Feeder horizontally and
insert it into the bracket where the 50 Sheet
Bypass Feeder was installed. Make sure it is
securely attached.
Power OFF and ON the printer.
4
5
Print a Configuration Sheet (see page 3-83)
and confirm that the Envelope Size item
appears in the Tray Menu section of the
Configuration Sheet.
100 Envelope Feeder
C-37