Xerox DP N24 System Administrator Manual page 89

Table 3.7 Tray Menu functions (continued)
Menu Item and Function
Tray Sequence
Set the sequence of trays used by the
printer when tray switching is required.
The available values are:
Off
MBF-1
†
MBF-1-2
MBF-4-5
MBF-4-5-1
MBF-4-5-1-2
††
MBF-4-5-1-2-3
†††
1-2
1-2-3
4-5-1
4-5-1-2
††††
4-5-1-2-3
4-1
4-1-2
4-1-2-3
† With Bypass Feeder and no 2,500 Sheet Feeder.
†† With Bypass Feeder and 2,500 Sheet Feeder.
††† With Envelope Feeder and no 2,500 Sheet Feeder.
†††† With Envelope Feeder and 2,500 Sheet Feeder
The first tray of a sequence is used until it
runs out of paper, at which time the next
tray in the sequence is used (if it has the
correct paper size and type). See the
section "Automatic Tray Switching"
(page 2-16) for rules and examples of
usage.
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line . You will see:
Chapter 3: Using the Control Panel
Tray Menu
Display
M e n u s
T r a y M e n u
T r a y M e n u
T r a y S e q u e n c e
T r a y S e q u e n c e
New Value
T r a y M e n u
T r a y S e q u e n c e
R e a d y
Table 3.7 Page 5 of 5
=
3-25