Cleaning The Printer; Exterior Cleaning - Xerox DP N24 System Administrator Manual

Cleaning the Printer

Cleaning the
Cleaning the exterior and interior of the printer as described in this
section will help keep your printer in optimum working condition.
Printer
Use only water or mild detergent on exterior surfaces. Do not use
cleaning alcohol or other volatile substances that may discolor,
crack or deform the printer casing.
Be sure to power OFF the printer and disconnect the power cord
before cleaning the interior of the printer.
The Fuser area becomes very hot in operation. It is best to wait at
least 15 minutes for the printer to cool off before attempting to clean
the interior of the printer.

Exterior Cleaning

Clean the exterior of the printer about once a month, using a soft,
slightly damp cloth (see Figure B.2 below). For stubborn stains, soak
the cloth in a mild detergent solution before cleaning. Always finish by
wiping the printer again with a soft, dry cloth.
Figure B.2 Cleaning the exterior of the printer
Appendix B: Maintaining the Printer B-23