Xerox DP N24 System Administrator Manual page 93

Table 3.8 PCL Menu functions (continued)
Menu Item and Function
Form Length
Set the number of lines per page used in
PCL. The available values are:
005 - 128 (60* USA) (64* Europe)
Form Length is automatically adjusted
when Paper Size is changed. For example,
setting Paper Size to A4 adjusts Form
64
Length to automatically. Setting Paper
Letter
Size to adjusts Form Length
to 60 . Whenever Paper Size is changed,
Form Length is recalculated using the
formula: Form Length = ((logical page
length in inches - 1 inch) * 6).
The Form Length value changes
incrementally by 1 each time either Value
Up or Value Down
Holding down Value Up
Down causes continuous scrolling
through the Form Length values.
The value of this setting after performing
a Reset Menus depends on the value of the
Defaults setting.
Keystrokes
1. Press Menu Up
Down
2. Press Item Up
Down
3. Press Value Up
Down
4. Press Enter
5. Press On Line
is pressed.
or Value
or Menu
M e n u s
until you see:
P C L M e n u
or Item
P C L M e n u
until you see:
F o r m L e n g t h
or Value
F o r m L e n g t h
until you see:
New Value
. You will see:
P C L M e n u
F o r m L e n g t h
. You will see:
R e a d y
Chapter 3: Using the Control Panel
PCL Menu
Display
=
Table 3.8 Page 3 of 4
3-29