Serial Menu
Table 3.12
Serial Menu functions
Menu Item and Function
Port Enable
Enable or disable the serial port. The
available values are:
On*
Off
Port Timeout
Set the time for determining when to end
an incomplete print job and poll the next
port in the polling sequence. The available
values are:
5 - 300 seconds (30*)
This item also causes an implicit job end
such as Control D in PostScript or <ESC>
E in PCL, and invokes the emulation
functions associated with this action (e.g.,
formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up
Value Down
is pressed. Holding
down Value Up
or Value Down
causes continuous scrolling through the
values.
3-46
DP N24, N32 and N40 System Administrator Guide
Keystrokes
1. Press Menu Up
Down
until you see:
2. Press Item Up
or Item
Down
until you see:
3. Press Value Up
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line
. You will see:
1. Press Menu Up
Down
until you see:
2. Press Item Up
or Item
Down
until you see:
3. Press Value Up
Down
until you see:
4. Press Enter
. You will see:
5. Press On Line
. You will see:
or
Display
or Menu
M e n u s
S e r i a l M e n u
S e r i a l M e n u
P o r t E n a b l e
or Value
P o r t E n a b l e
New Value
S e r i a l M e n u
P o r t E n a b l e
R e a d y
or Menu
M e n u s
S e r i a l M e n u
S e r i a l M e n u
P o r t T i m e o u t
or Value
P o r t T i m e o u t
New Value
S e r i a l M e n u
P o r t T i m e o u t
R e a d y
Table 3.11 Page 1 of 2
=
=