Page 1
XEROX DocuColor 12/ Document Centre ColorSeries 50 Electronic Pre Collation (EPC) Customer Supplement The Document Company XEROX...
Page 2
Xerox®, The Document Company Xerox®, the stylized X, and all Xerox product names and product numbers mentioned in this publica- tion are registered trademarks of XEROX CORPORATION.
Safety Notes The Xerox Electronic Pre Collation (EPC) module has been designed and tested to meet strict safety requirements. Attention to the following notes will ensure the continued safe operation of your equipment. Electrical safety Do not attempt to override any electrical or mechanical interlock devices.
EPC, and could create a dangerous condition. Use the supplies and cleaning materials only as directed in the DocuColor 12 System Administration Guide or the Document Centre ColorSeries 50 System Administration Guide. Keep all of these materials out of the reach of children.
• Collated copy sets • Stapled copy sets (with the In-Line Stapler Finisher installed) • Additional originals added to a job set • Face Up or Face Down copy output options DOCUCOLOR 12/DCCS 50 CUSTOMER EPC SUPPLEMENT...
NOTE: If the In-Line Stapler Finisher option is installed, output is directed to the Finisher Output Tray, and your sets will be offset. Press the Start button. The copies will be delivered to the appropriate output tray. CUSTOMER EPC SUPPLEMENT DOCUCOLOR 12/DCCS 50...
Paper is the selected Paper sup- Paper is the selected Paper ply and SEF paper is loaded in a Supply and LEF paper is Paper Tray. loaded in a Paper Tray. 2 Staples 2 Staples DOCUCOLOR 12/DCCS 50 CUSTOMER EPC SUPPLEMENT...
Page 10
Stapler Finisher and the feed edge of each paper is the same length. NOTE: For more information on using the In-Line Stapler Finisher, refer to the DocuColor 12/ Document Centre ColorSeries 50 In-Line Stapler Finisher User Guide. Under Copy Output on the Basic Copying tab, touch the Stapling &...
Page 11
Figure 4: Stapling Options screen Select any additional features desired for the copy job. Place the originals in the DADF. Press the Start button. The copies will be stapled and delivered to the Finisher Output Tray. DOCUCOLOR 12/DCCS 50 CUSTOMER EPC SUPPLEMENT...
Touch the Additional Originals button. Figure 5: Job Assembly tab When the Additional Originals screen opens, the feature defaults to On. Touch Save to return to the previous Job Assembly tab. Figure 6: Additional Originals screen CUSTOMER EPC SUPPLEMENT DOCUCOLOR 12/DCCS 50...
Page 13
For all additional originals, repeat steps 9 and 10. When all pages or all sets have been scanned, touch End Job on the Job in Progress screen. Copies will be delivered to the appropriate output tray. DOCUCOLOR 12/DCCS 50 CUSTOMER EPC SUPPLEMENT...
Touch the Output Delivery button. Figure 8: Job Assembly tab Select one of the available options on the Output Delivery Screen. Touch Save to return to the previous Job Assembly tab. Figure 9: Output Delivery screen CUSTOMER EPC SUPPLEMENT DOCUCOLOR 12/DCCS 50...
Touch Close to display the Tools screen. Touch Close to exit Tools Mode. NOTE: For more information on Tools mode, refer to the DocuColor 12 System Administration Guide or the Document Centre ColorSeries 50 System Administration Guide. DOCUCOLOR 12/DCCS 50...
Page 18
Prepared by: Xerox Corporation Global Knowledge & Language Services 800 Phillips Road – Building 845 – 17S Webster, New York 14580 March 2001 701P36561...