Uploading the two Equitrac Provider plug-ins........2 Checking the status of the embedded plug-ins........3 Deactivating the plug-ins..................3 Activating the plug-ins....................4 Configuring the machine to use Xerox Secure Access for authentication........................5 Enabling Xerox Secure Access settings..............6 Disabling the USB card reader....................7 Deactivating the two Equitrac Provider plug-ins..........7 Disabling the plug-in feature.................8...
Page 4
Table of Contents ® Xerox D95/D110/D125 Printer and Copier/Printer Xerox® Secure Access Installation Guide...
Installation Connecting the USB card reader Two USB ports are located on the back of the Xerox machine. The two USB ports are located next to each other. Insert the USB connection from the card reader into the USB port on the right side.
Xerox Secure Access Installation Guide Configuring the machine to communicate with the USB card reader Enabling the plug-in feature on the machine 1. Open an internet web browser. 2. Enter the IP address of the machine in the address field.
Xerox Secure Access Installation Guide Select the Browse button. b) Select Equitrac XCP Provider file and select the Open button. c) Select the Upload button. 12. Select the Security folder. 13. In the Security folder, select Plug-in Settings. 14. In the Plug-in Settings folder, select List of Embedded Plug-ins (from the directory tree).
Xerox Secure Access Installation Guide 2. Enter the IP address of the machine in the address field. ® 3. Press Enter to go to CentreWare Internet Services. 4. Select the Properties tab. 5. If prompted, enter the system administrator user name and password.
Select Close to return to the List of Embedded Plug-Ins. Configuring the machine to use Xerox Secure Access for authentication The following steps are required for Xerox Secure Access to communicate with the Authentication feature. 1. Open an internet web browser.
Xerox Secure Access Installation Guide b) Enter the IP address of the machine in the address field. ® c) Press Enter to go to CentreWare Internet Services. d) Select the Properties tab. e) If prompted, enter the system administrator user name and password.
9. Select Xerox Secure Access Settings in the directory tree. The Xerox Secure Access Settings page displays. 10. In the Xerox Secure Access Server area perform the following steps: a) Enter details in the Default Prompt and Default Title fields.
Xerox Secure Access Installation Guide 4. Select the Properties tab. 5. If prompted, enter the system administrator user name and password. The default user name is admin and the default password is 1111. 6. Select OK. 7. Select the Security folder.
Xerox Secure Access Installation Guide c) Select OK. Disconnecting the USB card reader from the USB port on the machine Unplug the USB card reader from the device USB port. For instructions on installing and configuring the traditional flat-box card reading device, refer to the documentation provided with that device.