Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Xerox DocuPrint 205
Summary of Contents for Xerox DocuPrint 205
- Page 1 DocuPrint 205/255/305 DocuPrint 240A/340A ESC/P Emulation Settings Guide...
- Page 2 We welcome any comments on ambiguities, errors, omissions, or missing pages. Xerox, The Document Company and the stylized X are registered trademarks of Xerox Corporation. All Xerox and Fuji Xerox product names are either registered trademarks or trademarks of Xerox Corporation and Fuji Xerox Co., Ltd.
-
Page 3: Preface
Preface Thank you for choosing this printer. This manual explains how to set up the printer to perform ESC/P emulation. Be sure to read this manual first to ensure proper use of this product. Note that this manual is written for users who have basic knowledge of the operating environment and operation method as well as the method of using this printer. -
Page 4: Table Of Contents
Contents Preface......................3 Contents......................4 Using This Guide ....................5 Using Emulation ..................6 About Emulation ...................... 6 Emulation Mode .......................6 Host Interface and Emulation ..................6 Switching Between Print Languages ...............7 ESC/P Mode Menu Screen ..................7 About Fonts ......................8 Usable Fonts ......................8 User-defined Fonts (Specially Registered Fonts) ............8 Font Cache ......................8... -
Page 5: Using This Guide
Using This Guide Prerequisite Knowledge Read this guide in detail before using this printer. If you are not familiar with the machine to which the printer is to be connected or the basic operations or concepts of the software, read the relevant manuals first. Machines and software to which the printer is to be connected refer to personal computers, workstations, networks, and the respective operating systems and applications on which these machines run. -
Page 6: Using Emulation
Using Emulation About Emulation This chapter explains ESC/P emulation of print languages available on this printer. Print data conforms to certain rules (grammar). These rules (grammar) are called print language. This printer supports a page description language used to create images on a page basis and an emulation feature used to obtain the print result similar to that obtained by another printer. -
Page 7: Switching Between Print Languages
Switching Between Print Languages This printer supports multi-emulation, allowing you to switch between print languages. There are three methods of switching between print languages. Switching by Commands Commands for switching between supported print languages are provided. Upon receipt of a command, this printer selects the relevant print language. Automatic Switching This printer analyzes the data received by the host interface to identify the print language to be used. -
Page 8: About Fonts
About Fonts This section explains the fonts that can be used in the ESC/P emulation mode. Usable Fonts The following fonts can be used in ESC/P emulation. Outline Fonts Chinese fonts • ShuSongTi • FangSongTi • KaiTi • HeiTi European fonts •... -
Page 9: Eject Function
Eject Function This section explains the eject function. There are two types of eject functions as shown here. • The remaining data is forcibly ejected. • All jobs in the printer are eliminated. To Forcibly Eject Remaining Data For ESC/P emulation mode, data is not ejected until a full page of data has accumulated. When using a parallel interface, if operations stop while the data for the last page is being transferred, this machine waits for the next data until the time set [Auto Eject Time] has passed, and the “Waiting for data”... -
Page 10: To Eject All Jobs In The Printer
To Eject All Jobs in the Printer Print all jobs that the printer has received. Through this procedure, you can interrupt the receiving of data and empty the buffer. The procedure is explained below. Press the <Online> button when the display shown to the right appears. -
Page 11: Other Print Features
Other Print Features This section explains the other print features that are available in the ESC/P emulation mode menu. Multiple Up This feature prints multiple pages reduced on a single piece of paper. This feature is available in the ESC/P emulation mode. 2 Up is available in the ESC/P mode menu. -
Page 12: Esc/P Mode Settings
ESC/P Mode Settings About the Mode Menu This section explains the types of menus and hierarchy of the emulation mode menus. This Printer’s Menus The menu is divided into two menus, a mode menu for making emulation related settings, and a common menu for making other printer settings. You can set the following items in the common menu when using ESC/P emulation. -
Page 13: About The Mode Menu
About the Mode Menu The ESC/P mode menu is used to set items specific to ESC/P emulation. You can change the mode menu settings while the printer is printing. When this is done, the changed settings take effect from the next job. The mode menu is configured from the following levels. -
Page 14: Esc/P Mode Menu Settings
• [Tray 3] and [Tray 4] are displayed only when the optional trays are installed. • [Tray 1 (Bypass)] is displayed only when the bypass tray (optional) is installed on DocuPrint 205/255/ 305. [Tray 1] cannot be set when the optional bypass tray is installed. The default is [Auto]. -
Page 15: Document Size
Note • When [Fixed %] or [Full Size] is set at [Zoom Mode], the scaling factor is automatically set by the combination of [Document Size] and [Output Size]. When the 2 Up mode is set, the scaling factor is automatically set by halving the combination of [Document Size] and [Output Size]. •... -
Page 16: Zoom Mode
Zoom Mode Fixed % (default) The scaling factor is automatically calculated from the currently set document size and paper size, and the document is printed so that the document size print area fits into the print area of the paper size. For this reason, the scaling factor becomes 100% (actual size) if the paper is the same size as the document. -
Page 17: Output Tray
Printing is started by operation on the printer (pressing the <Eject/Set> button) after printing by feeding from the bypass tray is instructed. The default is [Off]. Note • This item can be set when the bypass tray (optional) is installed on DocuPrint 205/255/305. Font Kanji Sets the typeface of the double-byte character set (kanji). -
Page 18: Print Control
Adjust Position Moves the position of the margin by shifting the data print position to the vertical or horizontal. Up & Down The position can be specified within the range -250 to 250 mm in 1 mm increments (-9.8 to 9.8 inches in 0.1 inch increments). - Page 19 ESCP Switch Important • Each of the [Text], [Minimum Text], [Page Length] and [1 inch Skip] settings is not reflected when extended commands arrive as these features select defaults. Text Sets the print quality mode of the text to [Text High Dens.] (default) or [Draft]. Note •...
- Page 20 Extension Sets whether or not to enable the specified extender. Printing can be controlled using text code when the extender is enabled. Default is [Disable]. Note • Extended commands are prefixed with the extender, followed by command recognition data and parameter data, if necessary.
-
Page 21: Setting The Esc/P Mode Menu
Setting the ESC/P Mode Menu The following example explains how to set the ESC/P mode document size to [A3 SEF] using the mode menu. Ready to print Press the <Menu> button. Menu Print Language Press the < > button. Print Language ESCP Press the <... -
Page 22: About The Esc/P Mode List
About the ESC/P Mode List This section explains the ESC/P mode list. Note • For details on other reports/lists, refer to the User Guide 6.2 Printing Reports/Lists. ESC/P Mode List • ESC/P Settings List Setting values made in the ESC/P can be checked. •... -
Page 23: Materials Related To Esc/P Mode
Materials Related to ESC/P Mode List of Scaling Values Note • Some output sizes may not be used depending on the printer model. Fixed Scaling Values Document Output Post 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 Size Size card... - Page 24 Document Output Post 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 Size Size card Long side Postcard Short side Long side 15 × 1 Short side Long side 15 × 2 Short side Long side 10 × 11 Short side Long...
- Page 25 Document Output B5/2 Post 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 A3/2 A4/2 A5/2 B4/2 Size Size B5/2 card/2 Long side Short side Long side 11 × 17 Short side Long side 8.5 × 14 Short side Long...
- Page 26 Cut Sheet Scaling Value (Full Size) Document Output Post 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 Size Size card Long side Short side Long side Short side Long side Short side Long side Short side Long side Short...
- Page 27 Document Output Post 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 Size Size card Long side 15 × 12 Short side Long side 10 × 11 Short side Long side 10 × 12 Short side Unit: [%] Note •...
- Page 28 Document Output B4/2 B5/2 Post 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 A3/2 A4/2 A5/2 Size Size B5/2 B5/2 card/2 Long side 8.5 × 14 Short side Long side 8.5 × 13 Short side Long side 8.5 ×...
-
Page 29: Paper Size And Number Of Printed Digits
Paper Size and Number of Printed Digits Note • Some output sizes may not be used depending on the printer model. When Paper Feed Position Is 22 mm (0.9") Portrait Landscape Output Size Number of Number of Number of Number of printed digits printed lines printed digits... - Page 30 Cut Sheet (Full Size) Portrait Landscape Output Size Number of Number of Number of Number of printed digits printed lines printed digits printed lines Postcard 11 × 17 8.5 × 14 8.5 × 13 8.5 × 11 Note • The above values were obtained based upon a character pitch of 10 cpi and line pitch of 6 lpi. 15"...
-
Page 31: Index
Index barcode ......11 configuring ESC/P mode menu settings ..21 cut sheet scaling value (full size) . - Page 32 Other comments: After completing this form, detach and send it to the address below. (Please use your own envelope and postage stamp.) Thank you for your cooperation. Fuji Xerox Co., Ltd. KSP R&D 2D7 3-2-1, Sakado, Takatsu-ku Kawasaki-shi, Kanagawa-ken JAPAN 213-0012.
- Page 33 ESC/P Emulation Settings Guide Human Interface Design Development ME3212E2-1 (Edition 1) Document Products & Supply Company © Fuji Xerox Co., Ltd. Copyright 2003 by Fuji Xerox Co., Ltd.
-
Page 34: List Of Mode Menu (Esc/P)
List of Mode Menu (ESC/P)
Need help?
Do you have a question about the DocuPrint 205 and is the answer not in the manual?
Questions and answers