Xerox DP N24 System Administrator Manual page 195

Table 6.2 Control Panel messages and corrective actions (continued)
Message
R e m o v e O u t p u t
F r o m M a i l b o x 7
R e m o v e O u t p u t
F r o m M a i l b o x 8
R e m o v e O u t p u t
F r o m M a i l b o x 9
R e m o v e O u t p u t
F r o m M a i l b o x 1 0
R e p l a c e P r i n t
C a r t r i d g e
Reset ENV/Bypass
Reset Trays 2,3
R O S T r o u b l e
Power Off/On
Description/Corrective Action
The Mailbox 7 output bin is full. Printing cannot continue.
ACTION: Remove the output from the Mailbox 7 output bin.
The Mailbox 8 output bin is full. Printing cannot continue.
ACTION: Remove the output from the Mailbox 8 output bin.
The Mailbox 9 output bin is full. Printing cannot continue.
ACTION: Remove the output from the Mailbox 9 output bin.
The Mailbox 10 output bin is full. Printing cannot continue.
ACTION: Remove the output from the Mailbox 10 output bin.
The Toner Cartridge has reached its end of life. Printing cannot resume.
ACTION: Replace the Toner Cartridge as per the instructions in Appendix
B: Maintaining the Printer.
A jam may have occurred in the Envelope Feeder or Bypass Feeder
ACTION: Reseat the Envelope Feeder or Bypass Feeder.
A jam may have occurred in the Trays 2 and/or 3.
ACTION: Reseat the trays.
This message indicates there is a problem with the ROS controlling ASIC.
ACTION: Power OFF the printer and power it ON again. If the message appears
again, contact your dealer or Olivetti.
Control Panel Messages
Table 6.2 Page 17 of 19
Chapter 6: Troubleshooting 6-21