Type 8792, 8793
Type 8792, 8793
Start-up, operation
position controller Type 8792
Procedure:
→
To input the characteristic points (function values), select the
confirm by pressing the selection key on the right (SELEC).
Another sub-menu (FREE) opens in which the individual nodes are listed (as %).
→
Select the individual nodes using the arrow keys and confirm by pressing the selection key on the right (INPUT) in
order to change the value in the SET VALUE sub-menu.
Return without change
Fig. 41:
Display CHARACT FREE
→
Using the arrow keys (+/-), set the function value from 0 to 100% and confirm by pressing the selection key on
the right (OK).
→
When all changes have been made, leave the sub-menu by pressing the selection key on the left (EXIT).
→
Press the selection key on the left again (EXIT) to return to the
Changed values are not transferred into the memory (EEPROM) until the main menu (MAIN) is left.
SET VALUE
y 0 -> :
0.0
%
0.0
–
ESC
+
FREE sub-menu option using the arrow keys and
Previously set value (as %)
This value (as %) is changed with
the arrow keys
Accept the set value
OK
CHARACT menu option.
english
97