21.3.19. Extras; 21.3.20. Pos.sensor; 21.3.21. Service - Burkert 8792 Operating Instructions Manual

21.3.19. EXTRAS
This function can be used to set the representation on the display.
ENTER
EXTRAS
Fig. 67: Operating structure EXTRAS
21.3.20. POS.SENSOR
The remote model of the process controller type 8793 can be connected to the path sensor by means of different
interfaces (the position controller type 8792 remote model with digital interface only).
The POS.SENSOR menu option does not appear in the ADD.FUNCTION selection menu unless a
process controller type 8793 is a remote model.
If the ANALOG interface setting is selected, the positioner can be operated as a position controller only
and no longer as a process controller.
The P:CONTROL menu option is removed automatically.
POS.SENSOR
Bild 1: Operating structure POS.SENSOR
①
D igital interface (menu option POS.SENSOR → DIGITAL):
The positioner is connected to the path sensor type 8791 via a digital interface (see chapter 17.2.4.).
②
A nalog interface (menu point POS.SENSOR → ANALOG):
The positioner is connected via a 4 – 20 mA interface to any path sensor with a 4 – 20 mA output signal.
If the path sensor requires an additional power supply voltage of 24 V DC, this can be supplied via the posi-
tioner (see chapter 17.3.1..
21.3.21. SERVICE
This function is of no importance to the operator of the positioner. It is for internal use only.
120
ENTER
DISPLAY
EXIT
ENTER
DIGITAL
EXIT ANALOG
english
Type 8792, 8793 Type 8792, 8793
Start-up, operation
position controller Type 8792
SELEC
normal
invers
ENTER
①
The position signal of the path sensor is
transmitted digitally
②
The position signal of the path sensor is
transmitted analogically
Black font on light
background
White font on dark
background