Burkert 8792 Operating Instructions Manual page 144

22.7.4.4. self-optimization sequence of the process controller
Display
starting process tune
identifying control process
calculating PID parameters
TUNE ready
TUNE err/break
Table 37: Sequence of the self-optimization function
144
Description
Start of the self-optimization function.
Automatic process identification. Characteristic process parameters are deter-
mined from the response signal to a defined prompt.
Determination of the structure and parameters of the PID controller.
Successful end to the self-optimization function.
Display if the self-optimization function is stopped or if a fault occurs.
english english
Type 8792, 8793
Start-up, operation
process controller Type 8793