Information On The Display; Operating Structure - Burkert 8792 Operating Instructions Manual

Type 8792, 8793
Start-up, operation
process controller Type 8793
23.3.2. information on the display
The following variables are indicated on the display for the process controller and it is possible to switch between
them with the arrow keys:
representation.of.
Value.range./.unit
value
POS XXX 0 – 100 %
CMD XXX 0 – 100 %
TEMP XXX -100 – 150 °C
PV XXX Depending on the signal type
SP XXX Depending on the signal type
Table 39: Display; process controller Type 8793
23.3.3. Operating structure
AUTOMATIC operating state
Configuration
Menu option
EXIT
MANUAL operating state
* Displayed only when P.CONTROL auxiliary function activated.
** only active if the internal set-point value default (P.CONTROL / SETUP / SP INPUT / internal) has been selected.
Fig. 85: Operating structure AUTOMATIC; process controller Type 8793
Description
MENU
Display
(no operator action)
EXIT
AUTO
Display of actual position of the valve actuator
Display of nominal position of the valve actuator
Internal temperature in the housing of the positioner
Process actual value
Process set-point value
INPUT
SP
active**
OK
MANU
english english
Switch between the
displays*
POS PV
CMD SP
TEMP
Set process
set-point value
147