Attaching.the.positioner.with.mounting.bracket.for.actuators.with.columnar.yoke:
→
Attach mounting bracket to the columnar yoke with the U-bolt
(see Fig. 18:).
Fig. 18:
Attach positioner with mounting bracket; for actuators with cast frame
14.2.4. aligning lever mechanism
The lever mechanism cannot be correctly aligned until the device has been connected electrically and
pneumatically.
→
Move the actuator in manual mode to half stroke (according to the scale on the actuator).
→
Adjust the height of the positioner until the lever is horizontal.
→
Fix the positioner in this position on the actuator.
52
21
10
11
7
english
Type 8792, 8793
Installation
⑦
⑪
⑩
, washers
, circlips
21
and hexagon nuts