Maintenance - Burkert 8792 Operating Instructions Manual

36.

MainTenance

The.positioner.Type.8792.is.maintenance-free.when.operated.according.to.the.instructions.in.this.manual.
37. errOr Messages and MalfuncTiOns
37.1. error Messages on the display
37.1.1. general error Messages
Display
min
max
CMD error
EEPROM fault
MFI fault
invalid code
Table 49: General error message, position controller Type 8792
194
Causes.of.error
Minimum input value has been reached Do not reduce value further
Maximum input value has been reached Do not increase value further
Signal error
Set-point value position controller
EEPROM defective
Field bus board defective
Incorrect access code
english
Type 8792, 8793
Servicing and Troubleshooting the
Position Controller Type 8792
remedial.action
Check signal
Not possible, device defective
Input correct access code