Type 8792, 8793
Installation
16.
elecTrical cOnnecTiOn -
MulTi-pOle plug versiOn
danGer!
risk.of.injury.due.to.electrical.shock!
•
Before reaching into the device or the equipment, switch off the power supply and secure to prevent
reactivation!
•
Observe applicable accident prevention and safety regulations for electrical equipment!
WarnInG!
risk.of.injury.from.improper.installation!
•
Installation may be carried out by authorized technicians only and with the appropriate tools!
risk.of.injury.from.unintentional.activation.of.the.system.and.an.uncontrolled.restart!
•
Secure system from unintentional activation.
•
Following installation, ensure a controlled restart.
using.the.4.–.20.mA.nominal.value.input
If the operating voltage of one positioner device fails in a series connection of several devices, the input of
the failed positioner device becomes highly resistive.
As a result, the 4 – 20 mA standard signal fails.
In this case please contact Bürkert Service directly.
If.PrOFIBuS.DP.or.Devicenet:
The designation of the multipole plugs and sockets and the contacts can be found in the respective
chapters.
16.1.
Type 8792 - designation of the circular connectors
Operating voltage
and diverse signals
2
1
8
3
7
4
6
5
M12, 8-pole plug
Fig. 24:
Type 8792; designation of the circular connectors and contacts
Binary outputs
optional
1
Function earth FE
M8, 4-pole socket
english
3
2
4
61