Burkert 8792 Operating Instructions Manual page 188

name Description
PDI:ERR Error
Indicates the number of the process value (output) which
was not written. The value is retained until it is deleted with
PDO:ERR.
HEX
14 PDO:CMD / SP
16 PDO:MODE
PDI: 0: Position controller
PCONact
1: Process controller
Table 46: Process Data Input, PROFIBUS-DP
PDI:PV and PDI:SP can be selected for Type 8793 (process controller) only and are beneficial only when
process controller activated.PDI:PCONact can be selected for Type 8793 (process controller) only.
→
.
Then the process data output input.
PDO: Process.Data.Output (from the controller to the positioner)
name Description
PDO:CMD/ for position controller Type 8792: Set-point position (input)
SP
Set-point value of position controller as ‰. Value range 0 – 1000
If the value is too small or too large, the last valid value is used
and is indicated in ERR with HEX 14.
for process controller Type 8793: Process set-point value (setpoint)
Set-point value of process controller in physical unit
(as set in the menu P.CO INP or P.CO SCAL),
max. value range -999 – 9999, depending on internal scaling.
If the value is too small or too large, the last valid value is used
and is indicated in ERR with HEX 14.
PDO:MODE Operating mode (operation mode)
Value range 0, 1 or 12:
0: AUTO
If the value is too small or too large, the last valid value is used
and is indicated in ERR with HEX 16.
PDO:ERR Reset error display
If the value > 0, ERR is reset
PDO: 0: Position controller
CONact
1: Process controller
Table 47: Process Data Output, PROFIBUS-DP
188
/ 1: HAND /
english
12: BUSSAFEPOS
Type 8792, 8793
PROFIBUS-DP
Identifier
GSD file: PDI:ERR
Identifier (HEX): 41, 00, 06
GSD file: PDI:PCONact
Identifier (HEX): 41, 00, 0A
Identifier
GSD file: PDO:CMD/SP
Identifier (HEX): 81, 40, 14
GSD file: PDO:MODE
Identifier (HEX): 81, 00, 16
GSD file: PDO:ERR
Identifier (HEX): 81, 00, 17
GSD file: PDO:CONact
Identifier (HEX): 81, 00, 19