Attachment.to.a.proportional.valve.with.swivel.actuator; Mounting Kit On Swivel Actuator (Part No. 787338); Installation - Burkert 8792 Operating Instructions Manual

Type 8792, 8793

Installation

14.3. attachment to a proportional valve with swivel
actuator
The axle of the position measuring system integrated in the positioner is connected directly to the axle of the
swivel actuator.
14.3.1. Mounting kit on swivel actuator (part no. 787338)
(Can be purchased as an accessory from Bürkert).
Part.no. Quantity name
1 1 Adapter
2 2 Setscrew DIN 913 M4 x 4
3 4 Cheese-head screw DIN 933 M6 x 12
4 4 Circlip B6
Table 15: Mounting kit on swivel actuator
Other.accessories:
The mounting bracket with fastening screws (in accordance with VDI/VDE 3845) must be purchased from the
manufacturer of the swivel actuator.
14.3.2. installation
WarnInG!
risk.of.injury.from.improper.installation!
• Installation may be carried out by authorised technicians only and with the appropriate tools!
risk.of.injury.from.unintentional.activation.of.the.system.and.an.uncontrolled.restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
Procedure:
→
Specify the attachment position of the positioner:
- parallel to the actuator or
- rotated by 90° to the actuator.
→
Determine home position and direction of rotation of the actuator.
→
Connect adapter to the axle of the positioner and secure with 2 setscrews.
english
53