Operation.of.the.process.controller; Operation.of.the.process.controller; Switching.between.the.operating.states - Burkert 8792 Operating Instructions Manual

Type 8792, 8793
Start-up, operation
process controller Type 8793
23. OperaTiOn Of The prOcess
cOnTrOller
A precise description of the control and display elements, as well as the configuration of the keys, can be
found in chapter 11.Control and display elements.
When the operating voltage has been switched on, the positioner is at the process operating level in the AUTO-
MATIC operating state.
At the process operating level the normal control mode is implemented and monitored (AUTOMATIC) and the valve
is manually opened or closed (MANUAL).
Fig. 84: Operating module; Specifying the Basic Settings
23.1. switching between the operating states
The right Selection key can be used to switch between the two operating states AUTOMATIC (AUTO) and MANUAL
(MANU).
In the AUTOMATIC operating state a bar runs along the upper edge of the display from left to right.
Display
Description of the key configuration
Right selection key
Down arrow key
Up arrow key
Left selection key
english english
145