General.information; General.information; Technical.data - Burkert 8792 Operating Instructions Manual

26. general infOrMaTiOn
The following sections of the general operating instructions do not apply to the positioner with PROFIBUS-DP:
• Variants of the positioner
• Initial start-up
• Electrical connection
• Specifying the standard settings
Function INPUT
Function SPLTRNG
Function BINARY-IN
Function OUTPUT
Function CAL.USER / calibr. INP
Function CAL.USER / calibr. SP
27. Technical daTa
The protocol sequence complies with the standard DIN 19245 Part 3.
GSD.file
Bitmap.files
PnO-ID.
Baud.rate
Sync.and.Freeze.mode Are not supported
Diagnosis.telegram
Parameter.telegram
The process data is configured in the positioner and in the PROFIBUS master.
Maximum 10 process values (total INPUT and OUTPUT) can be transferred.
176
BUER0C1E.gsd
BUER0C1E.bmp
0C1E Hex
Max. 12 mbaud
(is automatically set by the positioner)
No device-specific diagnosis
No user parameters
english
Type 8792, 8793
PROFIBUS-DP