Pressure controller for precise time-pressure dosing (13 pages)
Summary of Contents for Burkert 8742
Page 1
Type 8742 / 8746 Mass Flow Meter or Mass Flow Controller, with ATEX approval Massendurchflussmesser oder Massendurchflussregler mit ATEX-Zulassung Débitmètre massique ou régulateur de débit massique, avec certification ATEX Additional Instructions Zusatzanleitung Instructions supplémentaires...
Caution! All other descriptions and instructions can be found in the Operating Warns of a possible danger. Instructions of the device for the type 8742 or the type 8746. ▶ Failure to observe this warning may result in a moderate or minor injury. The Operating Instructions can be found on the Internet at: www.buerkert.com...
▶ Observe the admissible data, the operating conditions and 0500 Nl/min conditions of use specified in the contract documents, in the büS/CANopen Made in France Operating Instructions and on the name plate of the type 8742 S/N 1000 W1ZMG F-67220 Triembach Output signal 00273175 or the type 8746.
Type 8742 / 8746 Particular safety instructions PArTiculAr sAfeTy Danger! insTrucTions to prevent the risk of explosion, observe not only the safety instructions in the operating instructions for operation in the Danger! ex. area, but also the following: risk of explosion when removing the female connector. ▶ Observe information on temperature class, ambient temperature, protection rating, torque and voltage. ▶ After wiring of the device, screw the impact protection cover to ▶...
Type 8742 / 8746 Particular safety instructions 4.2.2 Adhesive label for ex. areas Danger! ▶ The mechanical strength is only guaranteed if the shock protection cover is mounted and securely tightened with the fastening screws. ▶ Use adequate measures to prevent transient overvoltages greater than 40% of the rated voltage.
Check that cleaning agent have approval for use in Type of the device Ambient temperature range explosive atmospheres. Type 8742 with valve type 2871 -10 °C...+50 °C Tab. 1: Ambient temperature range for devices with device 4.2.7 Tightening torque of the m12 protection level T3 / 160 °C...