Operating.modes; Operating.modes; Operating.state - Burkert 8792 Operating Instructions Manual

Type 8792, 8793
Control and display elements,
operating modes
12. OperaTing MOdes
12.1. Operating state
The positioner has 2 operating states: AUTOMATIC and MANUAL mode.
MENU
MENU OPN CLS
The right selection key can be used to switch between the two operating states AUTOMATIC (AUTO) and MANUAL
(MANU).
It is possible to switch from AUTOMATIC to MANUAL mode only on the POS and CMD displays and also
on the PV display for Type 8793. On the SP display only for external process set-point value (see also chapter
"11.2.Configuration of the keys").
AUTOMATIC
MANU
MANUAL
AUTO
Normal control mode is implemented and monitored in
AUTOMATIC operating state.
(A bar runs along the upper edge of the display).
In MANUAL operating state the valve can be opened and
closed manually via the arrow key (OPN/CLS).
(No bar running along the upper edge of the display).
english
39