Aligning Lever Mechanism - Burkert 8792 Operating Instructions Manual

Attaching the Type 8792/8793 with mounting bracket for actuators with columnar yoke:
→
Attach mounting bracket to the columnar yoke with the U-bolt
21
nuts (see "Fig. 17").
21
10
11
7
Fig. 17: Attach Type 8792/8793 with mounting bracket; for actuators with columnar yoke
12.2.4

Aligning lever mechanism

The lever mechanism cannot be correctly aligned until the device has been connected electrically
and pneumatically.
→
Move the actuator in manual mode to half stroke (according to the scale on the actuator).
→
Adjust the height of the Type 8792/8793 until the lever is horizontal.
→
Fix the Type 8792/8793 in this position on the actuator.
44
english
Type 8792, 8793 Type 8792, 8793
Attachment and assembly
⑦ ⑪ ⑩
, washers , circlips
Legend:
No. Name
7 U-bolt
10 Circlip
11 Washer
21 Hexagon nut
and hexagon