GE Multilin G650 Manual page 330

6 ACTUAL VALUES
6.3.2.3 POWER
Actual> Metering > Secondary Values > Power
Table 6–43: POWER SECONDARY VALUES
NOTE: If voltage inputs are configured in Delta connection and the Auxiliary Voltage input is set as VX or VN, measure-
ments of single phase power value cannot be duly calculated, and therefore, its value will be zero. Measurement for single
phase power value only will be provided when Wye connection is selected or when Delta connection and VN as Auxiliary
Voltage is selected in General Settings main menu. For the three-phase power value, the system uses the ARON method,
or two-wattmeters method.
GEK-113285A
DESCRIPTION
Phase A Apparent Pwr
Phase B Apparent Pwr
Phase C Apparent Pwr
Phase A Real Pwr
Phase B Real Pwr
Phase C Real Pwr
Phase A Reactive Pwr
Phase B Reactive Pwr
Phase C Reactive Pwr
3 Phase Apparent Pwr
3 Phase Real Pwr
3 Phase Reactive Pwr
Phase A Power Factor
Phase B Power Factor
Phase C Power Factor
3 Phase Power Factor
G650 Generator Protection & Control System
UNITS
VA
VA
VA
W
W
W
VARS
VARS
VARS
VA
W
VARS
N/A
N/A
N/A
N/A
6.3 METERING
6
6-37