GE Multilin G650 Manual page 304

6 ACTUAL VALUES
6.2.3.9 POWER
Directional power and power factor elements
These functions may have several applications, for example, small generating plants connected to the power system, to
limit the supplied power and not to exceed its rated capacity.
If programmed conditions for any of the three elements are met, the corresponding LEDs will light up.
This screen shows the activation of all power elements available in the G650. It can be accessed from the menu: Actual>
Status > Protection >Power, and it includes the following signaling LEDs.
Table 6–12: POWER ACTUAL VALUES
DIRECTIONAL POWER ACTUAL VALUES
DIR PWR1 STG1 PKP
DIR PWR1 STG1 OP
DIR PWR1 STG2 PKP
DIR PWR1 STG2 OP
DIR PWR1 STG PKP
DIR PWR1 STG OP
DIR PWR2 STG1 PKP
DIR PWR2 STG1 OP
DIR PWR2 STG2 PKP
DIR PWR2 STG2 OP
DIR PWR2 STG PKP
DIR PWR2 STG OP
DIR PWR3 STG1 PKP
DIR PWR3 STG1 OP
DIR PWR3 STG2 PKP
DIR PWR3 STG2 OP
DIR PWR3 STG PKP
DIR PWR3 STG OP
Note (*): Only available for enhanced models (see ordering code)
GEK-113285A
POWER FACTOR ACTUAL VALUES(*)
PF1 LAG STG1 OP
PF1 LEAD STG1 OP
PF1 LAG STG2 OP
PF1 LEAD STG2 OP
PF1 LAG OP
PF1 LEAD OP
PF2 LAG STG1 OP
PF2 LEAD STG1 OP
PF2 LAG STG2 OP
PF2 LEAD STG2 OP
PF2 LAG OP
PF2 LEAD OP
PF3 LAG STG1 OP
PF3 LEAD STG1 OP
PF3 LAG STG2 OP
PF3 LEAD STG2 OP
PF3 LAG OP
PF3 LEAD OP
G650 Generator Protection & Control System
6.2 STATUS
6
6-11