4.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE 4 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES
4.1.9.5 RECORDS
The Records menu is only available in on line mode and includes the possibility to retrieve all the records available in the
device. By serial or Ethernet.
Table 4–22: GENERAL OVERVIEW OF RECORDS MENU:
RECORDS (*)
4
Options enabled only in On-line mode are marked as (*). Options enabled only in Off-line mode are marked as (**)
Option only available in on line mode, showing all the operations previously configured in the relay with their corresponding
texts.
Table 4–23: GENERAL OVERVIEW OF OPERATIONS MENU:
OPERATIONS
Options enabled only in On-line mode are marked as (*). Options enabled only in Off-line mode are marked as (**)
4-26
Event recorder (*)
Retrieval and visualization of snapshot event (all and new), control
events and alarm panel. By serial or Ethernet (ModBus RTU or TCP/IP)
Waveform capture (*)
Retrieval of oscillography files, by serial or Ethernet.
Fault Report (*)
Retrieval and visualization of fault report files, by serial or Ethernet.
Data logger (*)
Retrieval and visualization of data logger files. Only by Ethernet.
Operation 1 (*)
Entry to first operation (with its corresponding text)
...
...
Operation 24 (*)
Entry to 24
G650 Generator Protection & Control System
4.1.10 OPERATIONS MENU OVERVIEW
th
operation (with its corresponding text)
GEK-113285A